User`s guide

5-38
User’s Guide
9. The event subscription configuration page is automatically updated with the new
subscription.
10.Click Test Subscription to check that the event subscription has been configured
correctly. Subscription parameters will be used to send a test message.
Note:
The OK button is accessible once all mandatory fields have been completed.
Editing Event Subscription Attributes
To modify an event subscription description, channel, address and/or filter, or to activate /
deactivate and/or enable / disable an event subscription:
1. Click Configuration Tasks → Events → Subscriptions in the PAM tree. The event
subscription configuration page opens.
2. Select the required event subscription in the event subscription table.
3. Click Edit to modify the attributes of this event subscription. The Edit Event
Subscription dialog box opens.
4. Select the new channel, E–mail Account, User History, or User Group from the
drop–down menu or enter a new SNMP Manager IP address.
5. Modify the description.
6. If required, activate / deactivate and/or enable / disable the event subscription by
checking / unchecking the Active and Enable boxes.
Warning:
If you deactivate / disable an event subscription, no events will be sent to the
recipient(s) until the event subscription is reactivated / re–enabled.
7. Click OK to confirm the modification.
8. Click Test Subscription to check that the event subscription has been re–configured
correctly.
Note:
The OK button is accessible once all mandatory fields have been completed.
Deleting an Event Subscription
To delete an event subscription:
1. Click Configuration Tasks → Events → Subscriptions in the PAM tree. The event
subscription configuration page opens.
2. Select the required event subscription in the event subscription table.
3. Click Delete in the toolbar. The Delete Subscription dialog box opens.
4. Click OK to confirm the deletion of the selected event subscription.