User`s guide

5-37
Tips and Features for Administrators
Creating an Event Subscription
Once event subscription prerequisites have been set up, you can create the event
subscriptions required to send messages to their destinations. See Event Subscription
Flowcharts, on page 5-28.
To create an event subscription:
1. Click Configuration Tasks → Events → Subscriptions in the PAM tree. The event
subscription configuration page opens.
2. Click New in the toolbar.
Figure 68. New Event Subscription dialog box
3. Check the Active and Enable boxes to activate and enable the new subscription.
4. Enter a short, readily identifiable name in the Name field and a brief description, if
required, in the Description field.
5. Select the required channel radio button:
– E–MAIL: to send event messages to an e–mail address.
– LOG: to send event messages to a user history.
– SNMP: to send event messages to the SNMP Manager.
– WEB: to send event messages to the status pane in the PAM web interface.
6. Select a pre–configured E–mail Account, User History, or User Group from the
drop–down menu or enter an SNMP Manager IP address.
7. Select a pre–configured filter from the Filter drop–down menu.
8. Click OK to confirm the creation of the new event subscription.