Installation guide

3-2
Installation Guide
Server Power
Problem Possible Cause Solution
The server does not power
up to standby.
The CSS module power cable is not
connected or is incorrectly
connected to the AC outlet.
Check the CSS module power cable
connection. Connect or reconnect the power
cable to the AC outlet.
The AC outlet is faulty. Try another AC outlet.
The AC source is missing. Call the site electrician to check the AC
source.
The AC power cable is faulty. Check the AC power cable for faults. Replace
the faulty cable.
The operating system does
not boot.
The disk rack power button is not set
to ON.
Check the power button on the rear of the
disk rack. Set to ON (I).
System disks are incorrectly inserted
in the disk rack.
Check system disk status LEDs. If the status
LEDs are not green, reinsert system disks.
The disk rack power cable is not
connected or is incorrectly
connected to the PDU.
Check the disk rack power cable connection.
Connect or reconnect the power cable to the
PDU.
The PDU power cable is not
connected or is incorrectly
connected to the AC outlet.
Check the PDU power cable connection.
Connect or reconnect the power cable to the
AC outlet.
The PDU circuit breaker is not ON. Check the PDU circuit breaker and turn ON if
required.
The AC outlet is faulty. Try another AC outlet.
The AC source is missing. Call the site electrician to check the AC
source.
Internal cables are not connected or
are incorrectly connected to their
dedicated ports.
Check data cable connections. Connect or
reconnect cables to their dedicated ports.
An internal cable is faulty. Check internal cables for faults. Replace the
faulty cable.
The server does not power
down (an activated domain
cannot be powered down).
Domain Operating System power
management settings do not allow
PAM software to power down the
domain.
Check domain Operating System power
management settings and change if required.
See User’s Guide, 86 A1 89EF.
The domain Operating System is not
responding.
Click Force Power OFF to shut down the
domain Operating System.
The PAM functional status
icon is not green.
See User’s Guide, 86 A1 89EF.
The PAM presence status
bar is not green.
See User’s Guide, 86 A1 89EF.