Installation guide

2-28
Installation Guide
Completing Linux Setup
Before proceeding to complete setup:
• Check Regional, Date/Time, and Time Zone settings.
• Check that the Customer has supplied the System and Networking data required to
complete setup and customize the system. See the Installation Setup Data tables in the
Read Me First document supplied on delivery.
Note:
SCSI Disk Racks
Unlock all DATA disks not used by the current Operating System instance. See Preparing
SCSI Disk Racks, on page 2-30.
Power up the required system domain by repeating the actions described in Powering Up /
Down the Server Domain on page 2-19. The Customer and the Customer Service Engineer
can now proceed to configure the Customer Enterprise Network (approximately 30
minutes).
Linux RedHat
Setup is completed via the Webmin administration tool:
1. From the PAP unit Microsoft Internet Explorer 6 or Linux Mozilla browser, enter the
Webmin URL:
http://<system name>:10000. The Login to Webmin dialog box opens.
2. Enter the factory default User Name and Password:
User Name
root
Password root
followed by Enter. The Webmin home page opens.
3. Click the Networking icon to open the Networking main page.
4. Click Network Configuration → Network Interfaces. In the Interfaces Activated at
Boot Time field, click Add a new interface to open the Create Bootup Interface
configuration page. Complete the required fields with the data supplied by the Customer
and click Create.
5. From the Interfaces Activated at Boot Time field, select the new interface. The Edit
Bootup Interface page opens. Check settings and click Save and Apply → Return to
network configuration.
6. Click Routing and Gateways to open the Routing and Gateways configuration page.
Complete the required fields with the data supplied by the Customer and click Save →
Return to network configuration.
7. Click DNS Client to open the DNS Client Options configuration page. Complete the
required fields with the data supplied by the Customer and click Save → Return to
network configuration.
8. Click Host Addresses → Add a new host address to open the Host and Addresses
configuration box. Complete the required fields with the data supplied by the Customer
and click Create → Return to host addresses list → Return to network
configuration → Return to index → System → Bootup and Shutdown to create a
new bootup and shutdown action.
9. From the action list, select Network to display the Edit Action page and click → Restart
Now → Return to action → Return to bootup and shutdown actions → Return to
index → Log Out to exit Webmin.