Installation guide

2-25
Setup Procedure
Enabling Remote Access to PAM on the Client Computer
The PAM software utility can be accessed from any standard PC running under Microsoft
Windows with the Microsoft Internet Explorer 6 (or later) browser installed.
To enable remote access to PAM:
1. Check that Microsoft Internet Explorer 6 (or later) and Java VM are installed on the Client
computer.
Note:
If Microsoft Internet Explorer 6 (or later) and/or Java VM is/are not installed on the Client
computer, they can be downloaded from the Microsoft) Web site.
2. Select Tools → Internet Options → Home page.
3. In the home page address field, type:
http://<papname>/pam
(where <papname> is the name given to the PAP unit during configuration) so that when
the Customer launches the Microsoft Internet Explorer 6 browser, he connects directly to
the PAM Web site. See Completing PAP Unit Configuration, on page 2-22.
4. Click Go to connect to the PAM Web site.
Enabling Remote Access to iSM on the Client Computer
The iSM Client utility can be installed on the PAP unit and on any standard PC running
under Microsoft Windows 2000 Server.
To enable remote access to iSM:
1. Insert the iSM Client setup CD–Rom in the client computer.
2. Run the CLIENT\2000\ISMCE211.EXE program to launch the setup wizard which guides
you through the iSM Client configuration procedure.
3. When you are requested to select Setup Type, click basic + extended function →
Next.
4. Once setup is complete, launch iSM Client to connect to iSM Server. A dialog box
appears requesting you to set the environment for iSM Client.
5. From the iSM Client menu, click File → Environment Settings to open the Server
Settings page.
6. In the IP Address field, enter the PAP unit IP address allocated during the PAP unit
setup process. See Completing PAP Unit Configuration, on page 2-22.
7. Click OK to establish the connection.
8. When requested enter the User Name and Password and click OK. See Changing the
iStorage Manager User Name and Password, on page 2-23.