Installation guide

2-22
Installation Guide
Completing PAP Unit Configuration
PAP unit configuration is reserved for Customer Service Engineers. To complete PAP unit
configuration:
1. Open a new Microsoft Windows 2000 Server session with the predefined User Name
and Password.
2. From the Microsoft Windows 2000 Server desktop, click:
Start → Program Files → Platform Administration and Maintenance → PAP
Configuration
to launch the PAP configuration setup wizard which guides you through the PAP unit
configuration procedure (approximately 10 minutes).
Figure 52. PAP configuration wizard
3. Follow the instructions displayed on the screen to customize the server with the
Installation Setup Data
supplied by the Customer.
Note:
During the setup process, the Customer Service Engineer and Customer Administrator are
requested:
– to configure Customer Enterprise LAN settings,
– to change the default factory PAP unit network setting,
– to change the Customer Administrator password,
– to configure PAM software via the PAM Web Site.
The Installation Setup Data
tables are part of the Read Me First, 86 A1 53EG booklet
enclosed in the Open Me First kit.