Installation guide

2-21
Setup Procedure
Customizing the Server
Once the operational check has been successfully completed, the authorized Customer
Service Engineer will customize the server by replacing factory default data with Customer
data.
A list of the Customer data required for re–configuration by the authorized Customer
Service Engineer is given in the Read Me First, 86 A1 53EG booklet delivered with the
system 24 hours before the scheduled installation date.
Important:
Before proceeding to complete PAP Unit configuration, check Regional, Date/Time,
and Time Zone settings.
The server is delivered with a QWERTY keyboard. Advise the Customer to take care
when entering User Names and Passwords.
Setting the BIOS Setup Utility Password
Access to the BIOS Setup Utility is reserved for Customer Service Engineers only and must
be protected by a password. To set the password:
1. Turn the site power supply circuit breakers ON in the following order:
a. PDU breaker.
b. CSS module breaker.
The Platform Administration Processor (PAP) unit automatically powers up and boots the
Microsoft Windows 2000 Server software, and the Bull NovaScale Server initializes.
2. Toggle the console display to the server port to visualize the POST. See Toggling the
Local / Integrated Console Display, on page 2-18.
3. When prompted, press <DEL> to enter Setup. After a few seconds, the BIOS Setup
Utility Main Screen appears.
4. Use the ← → keys to scroll throught the main menu screen to the Security menu.
5. Select Change Supervisor Password and press <ENTER>.
6. Enter the pre–defined password.
7. Exit the BIOS Setup Utility by selecting Exit saving changes.
Note:
Reserved for Customer Service Engineers only.
If the password has been lost or forgotten, it can be cleared by checking the Clear
Password box accessible from the PAM software utility:
Domain Manager → Advanced → BIOS Features → Clear Password and then rebooting
the domain.