Installation guide

1-10
Installation Guide
7. Raise the four jacking screws with the 27 mm hex wrench.
Figure 10. Cabinet jacking screws and retaining brackets
8. Carefully unload the cabinet from the pallet by rolling it slowly down the rail / ramp
assembly.
Figure 11. Unloading the cabinet
9. Roll the cabinet to the location indicated on the Customer’s floor plan.
Storing Packing Items
All packing items are to be stored in an ancillary room for re–use in the event of relocation
or shipping.
Before proceeding to set up the server, clear and clean the installation area.