Installation guide

1-8
Installation Guide
Figure 6. Assembling / installing unloading rails
5. Manually check that the pallet / rail / ramp assembly is secure.
Removing Cabinet Shipping Brackets
Yellow shipping brackets are used to secure cabinet flanges to the pallet during transport.
These brackets must be removed before unloading the cabinet.
Tools Required:
• 27 mm hex wrench
• 17 mm hex wrench
1. Lower the four jacking screws with the 27 mm hex wrench.
Figure 7. Lowering cabinet jacking screws
2. Use the 17 mm hex wrench to loosen the shipping brackets on either side of the cabinet.
3. Disengage the left shipping bracket from the cabinet by pushing firmly forwards.