Specifications

2-4
Site Preparation Guide
Network Cables
The following table indicates the number of Ethernet and Modem cables to be routed to the
cable cut-out at the base of each cabinet if the server is to be connected to the Customer's
LAN (for remote operation, administration, or maintenance):
Server
Network Cable
NovaScale Blade 2xxx
Servers
Production: 1 to 4 x 10/100/1000 Mb Ethernet cable per
embedded Ethernet Switch.
Management: 1 x 10/100 Mb Ethernet cable per
Chassis Management Module.
NovaScale 3xx5 Serv-
ers
1 x 10/100 Mb Ethernet cable or1 Gigabit Ethernet cable
per server CPU drawer
NovaScale 40x0
Servers
1 x 10/100 Mb Ethernet cable or1 Gigabit Ethernet cable
per server CPU drawer
NovaScale 5xx0
Servers
NovaScale 6xx0
Servers
NovaScale 5xx5 SMP
Servers
NovaScale 5xx5
Partitioned Servers
1 x 10/100 Mb Ethernet cable for the integrated
Platform Administration & Maintenance computer (PAP unit)
1 x 10/100 Mb Ethernet cable or 1 Gigabit Ethernet cable
per Central Subsystem (CSS) module
1 x Modem cable equipped with an RJ11 connector
(Remote Maintenance Modem)
Note:
Modem cable connectors differ from country to country.
Customers are to provide the RJ11 adapter required to comply with national standards.
For further details, please consult your Bull Sales Representative.