System information

C-17
Configurations de modems
# (C) COPYRIGHT International Business Machines Corp. 1996
# All Rights Reserved
# Licensed Materials Property of IBM
#
# US Government Users Restricted Rights Use, duplication or
# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
#
#
# If the modem has configuration switches, they should be set to the
# factory default settings.
ICDelay 1
DefaultTO 10
CallDelay 120
# AT Attention Code , Inserts delay in dialing commands
# &F1 Reset. Restore profile 1 Q0 Turn on responses
# E0 Turn echo off Q1 Turn off responses
# V0 Use numeric responses S0=0 Automatic answer inhibit
# +++ Escape to command mode S0=2 Answer on second ring
# H0 Hangup X0=0 Limit modem response codes
# T = Tone mode. When used as T\r, it is a
# no op to maintain program synchronization
# when modem may/will echo the commands.
#
# &C1 Detect CD &D2 Respond to DTR (often the default)
# &R1 Ignore RTS (CTS)
#
# %N CallOut phone number %P Paging phone number
# %S Modem speed (available to users)
#
# Following are common responses from a wide range of modems:
# 16, 15, 12, 10, 5 and 1 are connection responses. Add others as required.
# 7=busy; 6=no dial tone; 4=error; 3=no carrier; 2=ring; 0=OK
#
# PROGRAMMING NOTE: No blanks between double quote marks ().
condout: send AT&F1Q0T\r # Reset modem. Select profile 1
ignore 0\r or OK\r\n timeout 2 # Ignore modem response.
send ATE0T\r # Initialize modem: Echo OFF,
expect 0\r or OK\r\n timeout 2 # Enable responses (Numeric),
send ATQ0V0X0T\r # Limit response codes.
expect 0\r timeout 2 # Confirm commands successful.
send ATS0=0\r # Set AutoAnswer OFF
expect 0\r timeout 2 # Confirm command successful.
send AT&C1&D2&R1\r # Detect carrier and DTR,
# Ignore RTS.
expect 0\r timeout 2 # Confirm command successful.
done
connect: send ATDT%N\r # Tone dialing command.
# %N from Call Home setup.
# Expect a connection response.
expect 16\r or 15\r or 14\r or 12\r or 10\r or 5\r or 1\r busy 7\r
timeout 60
done