User`s guide

8-4
ESCALA T610 and PL 600T User’s Guide
Step 10
There is a problem with the keyboard.
Find the type of keyboard you are using in the following table, and perform the action listed
in the Action column.
Keyboard Type Action
101–key keyboard. Identify by the type of
Enter key used. The Enter key is within one
horizontal row of keys.
Record error code M0KBD001 and report
the problem to the service organization.
102–key keyboard. Identify by the type of
Enter key used. The Enter key extends into
two horizontal rows of keys.
Record error code M0KBD002 and report
the problem to the service organization.
Kanji keyboard. Identify by the Japanese
characters.
Record error code M0KBD003 and report
the problem to the service organization.
ASCII–terminal keyboard. This applies to all
attached terminals.
Go to the documentation for problem deter-
mination for this type terminal.
Step 11
1. If the terminal type has not been defined, you must use the Initialize Terminal
option on the Function Selection menu to initialize the operating system environment
before you can continue with the diagnostics. This is a separate and different operation
than selecting the console display.
2. Select Diagnostic Routines.
3. Press Enter.
4. In the following table, find the menu or system response you received when you selected
Diagnostics. Perform the action listed in the Action column.
System Response Action
The Diagnostic Mode Selection menu is dis-
played.
Select Problem Determination and go to
”Step 12”.
The Missing Resource menu is displayed. Follow the displayed instructions until either
the Diagnostic Mode Selection menu or an
SRN is displayed.
If the Diagnostic Mode Selection menu is
displayed, select Problem Determination
and go to ”Step 12”.
If you get an SRN, record it, and go to ”Step
14”.