User`s guide

4-6
ESCALA T610 and PL 600T User’s Guide
MultiBoot
Multiboot allows you to select a method for booting the system.
+––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+
|Multiboot |
| |
| 1 Select Software |
| 2 Software Default |
| 3 Select Install Device |
| 4 Select Boot Devices |
| 5 OK Prompt |
| 6 Multiboot Startup |
| |
| |
| |
| |
| |
| .––––––. |
| |X=Exit| |
| ‘––––––’ |
| |
| ===> |
| |
+––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+
Select Software
If this option is supported by the operating system, the names of the operating system
installed are shown. This option might not be supported by all operating systems.
If you are running AIX, and you receive the following message:
No Operating System Installed
this indicates that information in nonvolatile storage could have been lost, as would happen
if the battery had been removed. To re–create this value, run the bootlist command under
AIX with the appropriate parameters. See the bootlist command in your AIX
documentation. Contact your marketing representative for information about obtaining and
installing system firmware update packages.
Software Default
If this option is supported by the operating system, you can select the default operating
system to start the system. This option might not be supported by all operating systems.
Select Install Device
Produces a list of devices, such as the CD–ROM, from which the operating system may be
installed. Select a device, and the system searches that device for an operating system to
install.