User`s guide

3-17
Using the Service Processor
Power Control Network Utilities Menu
This menu allows the user to do a lamp test on the operator panels and display or change
the I/O type.
+––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+
| |
| POWER CONTROL NETWORK UTILITIES MENU |
| |
| 1. Lamp Test for all Operator Panels |
| |
| 2. Display I/O Type |
| |
| 3. Change I/O Type |
| |
| 98. Return to Previous Menu |
| |
| 1 |
+––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+
• Lamp Test for all Operator Panels
Selecting this option tests the operator panel indicators. When selected, the indicators
blink on and off for approximately 30 seconds.
• Display I/O Type
Nothing displays on the operator panel. After 20–30 seconds the Power Control Network
Utilities Menu redisplays on the console.
• Change I/O Type
This option is not available on this sytem.