User`s guide

3-6
ESCALA T610 and PL 600T User’s Guide
Privileged
Access
Password
General
Access
Password
Resulting Menu
None None Service processor MAIN MENU displays
Set None Users with the password see the service processor
MAIN MENU. Users without password cannot log in.
Set Set Users see menus associated with the entered pas-
sword
Note: If you forget the password, you must remove the battery for at least 30 seconds to
disable the password.
• Change Privileged Access Password
Set or change the privileged–access password. It provides the user with access to all
service processor functions. This password is usually used by the system administrator
or root user.
• Change General Access Password
Set or change the General Access Password. It provides limited access to service
processor menus, and is usually available to all users who are allowed to power on the
server, especially remotely.
Note: The General Access Password can only be set or changed after the Privileged
Access Password is set.
• Enable/Disable Console Mirroring
Console mirroring is supported on serial port 1 (S1) and serial port 2 (S2). When
Console Mirroring is enabled, the service processor sends information to both serial
ports. The serial port from which console mirroring is enabled is referred to as the active
port. The mirror port is determined when keyboard input is detected from the other port.
From this point on, the service processor only sends information to the active port and
the mirror port. This capability can be enabled by local or remote users, providing local
users the capability to monitor remote sessions. Console mirroring can be enabled for
the current session only. For more information, see ”Console Mirroring” on page 3-31.
• Start Talk Mode
In a console–mirroring session, it is useful for those who are monitoring the session to be
able to communicate with each other. Selecting this menu item activates the keyboards
and displays for such communications while console mirroring is established. This is a
full duplex link, so message interference is possible. Alternating messages between
users works best.