User`s guide

3-4
ESCALA T610 and PL 600T User’s Guide
• Exit from Menus
Selecting this option will exit the service processor menus. You can re–enter the menus
by pressing any key on the console.
Privileged User Menus
The following menus are available to privileged users only. The user must know the
privileged access password, if set, to access these menus.
Main Menu
At the top of the Main Menu is a listing containing:
• Your system’s current firmware version
• The firmware copyright notice
• The system name given to your server during setup
You need the firmware version for reference when you either update or repair the functions
of your service processor.
The system name, an optional field, is the name that your server reports in problem
messages. This name helps your support team (for example, your system administrator,
network administrator, or service representative) to more quickly identify the location,
configuration, and history of your server. The system name is set from the Main Menu using
option 6.
Note: The information under the Service Processor Firmware heading in the following Main
Menu illustration is example information only.
+––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+
| |
| Service Processor Firmware |
| VERSION: MM000313 |
| Copyright 1999 IBM Corporation |
| SYSTEM NAME |
| |
| |
| MAIN MENU |
| |
| 1. Service Processor Setup Menu |
| |
| 2. System Power Control Menu |
| |
| 3. System Information Menu |
| |
| 4. Language Selection Menu |
| |
| 5. Call–In/Call–Out Setup Menu |
| |
| 6. Set System Name |
| |
| 99. Exit from Menus |
| |
| 1 |
+––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+
• Service Processor Setup Menu
See ”Service Processor Setup Menu” on page 3-5 for more information.
• System Power Control Menu
See ”System Power Control Menu” on page 3-9 for more information
• System Information Menu
See ”System Information Menu” on page 3-12 for more information.