Installation guide

3-50
ESCALA T610 and PL 600T Installation Guide
8. Ensure that the battery polarity is correct. With the positive side of the battery facing out,
insert the battery between the front and rear battery mounts and gently push it down into
the socket.
Note: Be sure to reset the time and date and other system options that might have been
lost when the battery was removed.
If you are running AIX, you might have to run the bootlist command from AIX while
you are logged in as root user. This action restores the custom boot list and allows
the option of Select Software under multiboot to start the operating system. In
addition, the IP parameters might also have to be rebuilt.
9. Install the memory riser cards or blank memory cards removed earlier. See ”Removing a
Memory Card or One–Way Processor Card” on page 3-20.
10.Replace the processor and memory card cover.
11.If you have options to install, refer to ”Option List” on page 3-3.
12.If you do not have other options to install, replace the covers as described in ”Replacing
Covers” on page 3-48.