Installation guide

3-29
Installing Options
7. Select System Storage Management (Physical and Logical Storage).
8. Select Removable Disk Management.
9. Select Remove a Disk.
10.Select the desired disk from the list on the screen and press Enter.
11.Follow the instructions on the screen to remove the drive.
12.When you are asked ”Are you sure?” answer ”Yes” and press Enter. The power LED on
the drive that you selected turns off.
13.Remove the disk drive by pulling the disk drive lever toward you until it is completely
open. Then remove the disk drive from the slot. The LED on the top of the slot will turn
off when the disk drive is removed.
14.Repeat this process for all the drives you are removing from this bay. Then replace the
cover on the bay.
15.Press F10 to exit smitty.
16.If you have other options to install, refer to ”Option List” on page 3-3.
17.If you do not have other options to install, replace the front cover as described in
”Replacing Covers” on page 3-48.