Installation guide

3-6

ESCALA T610 and PL 600T Installation Guide

Removing Processor and Memory Card Cover

1. If you have not already done so, shut down the system as described in ”Stopping the

System Unit” on page 3-2.

2. If you have not already done so, unplug the system unit power cable from the electrical

outlet.

3. If you have not already done so, remove the covers as described in ”Removing the

Covers” on page 3-4.

4. Loosen the thumbscrew (1) on the right side of the processor and memory card cover

and open the cover. If the cover is opened far enough, you can remove it from the frame.

Replacing Processor and Memory Card Cover

To replace the processor and memory card cover, perform the removal steps in the reverse

order.