Installation guide

1-12

ESCALA T610 and PL 600T Installation Guide

Step 16. Are you Using an Ethernet Connection?

Ask your system administrator if you are not sure. If you are not using Ethernet or you have

already connected your Ethernet to an adapter, continue with ”Step 17: Plug in the Power

Cables” on page 1-13. To connect the Ethernet cable:

Note: The twisted–pair connector is compatible with the IEEE 802.3 Ethernet network

100/10 Base T link.

1. Connect the twisted–pair cable to the twisted–pair connector (1).

2. The twisted–pair Ethernet cable is now installed. Continue with ”Step 17: Plug in the

Power Cables” on page 1-13.