Specifications

Escala Tower PL & S, E, T System Hardware
Chapter 2: Models Description 25/94
9es3s1c2.doc
Rev 5.9
02/12/2003
4.8.2. CPU Board with 1-way POWER3-II@450MHz - 8MB L2 cache (CPUG074)
The Power Kit contains the following items:
•
One 1-way POWER3-II@450MHz CPU board - 8MB L2 cache.
Operational Requirements
•
Any PL220T with one free CPU slot.
•
1-way POWER3-II@450MHz CPU boards cannot be used with 1-way POWER3-II@375MHz
CPU boards.
5. Escala PL240T Server
5.1. PL240T Description
The PL240T provides:
•
This model is available only through packaged configurations
•
The PL240T supports the following CPU boards (One slot for 1 or 2-way CPU boards)
•
1-way POWER4+@1.2 GHz 64-bit copper-based silicon-on-insulator (SOI) processor boards
with 8 MB of L3 cache per processor card.
•
2-way POWER4+@1.2 GHz 64-bit copper-based silicon-on-insulator (SOI) processor boards
with 8 MB of L3 cache per processor card.
•
1-way POWER4+@1.45 GHz 64-bit copper-based silicon-on-insulator (SOI) processor boards
with 8 MB of L3 cache per processor card.
•
2-way POWER4+@1.45 GHz 64-bit copper-based silicon-on-insulator (SOI) processor boards
with 8 MB of L3 cache per processor card.
•
From 1GB to 16GB of DDR SDRAM memory provided by 8 slots located on the CPU boards.
The CPU board can house up to 16 GB of memory.
•
The system service processor
•
6 hot plug PCI-X bus slots
•
2 internal Ultra3 SCSI Controllers
•
4 standard internal hot-swap disk drive bays and 4 optional hot-swap disk drive bays
•
3 Medias Bays :
•
1 optional Open Bay for DVD-ROM
•
1 optional Open Bay for Disquette
•
1 optional DVD-RAM or tape drive
•
1 floppy disk 1.44 MB 3”1/2
•
Keyboard and mouse port
•
Two Ethernet ports (one 10/100 Mb/s and one 1 Gigabit )
•
3 serial ports
•
One parallel port
•
hot-swap and redundant fans
•
Optional redundant hot-swap power supply