Specifications

Escala Tower PL & S, E,T System Hardware
Chapter 7: Communications Controllers 13/34
9es3s1c7.doc
Rev 5.9
02/12/2003
Hardware
•
PCI bus
•
20 MHz IDT3041 RISC processor
•
1 Megabytes of tri-port DRAM
•
Maximum EIA-232 distance supported is 62 meters (200 feet).
•
Full modem support on all the lines, including Ring Indicator and Data Carrier Detect.
•
dual high speed V11 channels : up to 3,7 Mbps per channel
•
Each port can be configured for the following baud rates: 50, 75, 110, 134.5, 150, 200, 300, 600,
1200, 1800, 2400, 4800, 9600, 19200, 38400, 57600, 76800 and 115200 bps
•
surge suppression circuitry
•
Form factor : short length card
Cables
DB15-DB15 cables are required for the connection of the cluster boxes. Three lengths are available:
0,20-meter, 4,6-meter (direct connection or modem connection), 15-meter.
Attachment
The controller fits into a single PCI adapter slot.
Operating System Requirements
AIX 4.2, or later.
Supported Systems/Controllers
Escala
S100/S120 E604e/E620 T604e/T620 E230/E250/T430/T450 T610
Controllers
2 2 or 7 8 9 10
The total number of 8-port, 64-port and 128-port asynchronous controllers cannot be more than the
maximum supported by the Escala model.
Standards
This board meets the following electromagnetic emissions and safety standards:
Emissions:
•
FCC Part 15, class B
•
DOC CSA C108.8f
•
EN 55022
Safety:
•
US recognized, UL 1950
•
CSA Certified, CSA C22.2 No. 950
•
IEC 950 Safety (TUV) EN (60950)