Specifications

Escala Tower PL & S, E, T System Hardware
Chapter 5: Disks and Media 18/62
9es3s1c5.doc
Rev 5.9
02/12/03
1.37. 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive for Escala PL220T (MSUG215)
Internal (Ultra3 SCSI – LVD/SE) – hot-swap disk.
Form Factor 3" ½
Size 1"
Average Seek Time (ms) 3.7
Average Latency (ms) 2.00
Rotational Speed (RPM) 15000
Data Transfer Rate Media (MB/s) 83
1.38. 73.4 GB 15,000 RPM Ultra3 SCSI Disk Drive for CABG028/CABG029 (MSUG216)
CABG028/CABG029/CABG030
Discontinued: September 5, 2003
(Ultra3 SCSI – LVD/SE) – hot-swap disk.
Form Factor 3" ½
Size 1"
Average Seek Time (ms) 3.7
Average Latency (ms) 2.00
Rotational Speed (RPM) 15000
Data Transfer Rate Media (MB/s) 83
This disk drive requires attachment to a supported Ultra3 SCSI Adapter in an system that supports an
Ultra3 SCSI cable/backplane in order for the drive to run at 160MBps. Also, any and all other SCSI
devices on the same SCSI bus must also be Ultra2 or Ultra3 SCSI device(s) in order for this disk drive
to run at 160MBps
1.39. 36.4 GB 15,000 RPM Ultra3 SCSI Disk Drive for CABG028/CABG029 (MSUG217)
CABG028/CABG029/CABG030
Discontinued: September 5, 2003
(Ultra3 SCSI – LVD/SE) – hot-swap disk.
Form Factor 3" ½
Size 1"
Average Seek Time (ms) 3.7
Average Latency (ms) 2.00
Rotational Speed (RPM) 15000
Data Transfer Rate Media (MB/s) 83
This disk drive requires attachment to a supported Ultra3 SCSI Adapter in an system that supports an
Ultra3 SCSI cable/backplane in order for the drive to run at 160MBps. Also, any and all other SCSI
devices on the same SCSI bus must also be Ultra2 or Ultra3 SCSI device(s) in order for this disk drive
to run at 160MBps