Specifications

Escala Tower PL & S, E, T System Hardware
Chapter 3: External Storage and SAN Subsystems 19/116
9es3s1c3.doc
Rev 5.9
02/12/2003
The usable cache size is computed as described in the next table:
1 SP 2 SP
Raw memory per SP
(64, 128 or 256 MB)
M M
Write cache 0 W < M
Read cache M 2 x (M – W)
Total M W + 2 x (M – W)
M is the amount of available raw memory per SP
W is the value configured for the write cache size.
Because of the mirroring, the usable write cache is not multiplied by the number of SPs.
2.1.4.5. Summary of high availability features
•
dual port disks
•
dual loops / LCCs
•
dual Power supply with independent power cords
•
redundant fans.
•
no electronics in the chassis or back plain
•
all active components are hot plug
•
RAID protection
•
redundant SP
•
mirrored write cache.
2.1.4.6. Supported Fibre Channel topologies
The iDAE supports various fibre channel topologies:
•
point to point (connection with a direct cable)
•
loop (connection to a fibre channel hub)
•
fabric (connection to a fibre channel switch)
2.1.4.7. RAID features
The RAID features of the iDAE are:
•
RAID 0, RAID 1, RAID 1/0, RAID 3, RAID 5 and “individual disk” modes support
LUN type: Possible number of disks in the RAID volume:
RAID 0: 3 to 16 disks
RAID 1: 2 disks
RAID 1/0: 4 to 16 disks (must be an even number)
RAID5: 3 to 16 disks
All disks within a RAID volume must have the same capacity, otherwise disk storage space is
wasted.
•
Any combination of RAID levels can exist in the same subsystem