User`s guide

7.5 IPMI

Use this menu to configure Intelligent Platform Management Interface (IPMI) settings.

System Event Log

Enabling/Disabling Options

SEL Components

Select Enabled for all system event logging at bootup. The options are Enabled and

Disabled.

Erasing Settings

Erase SEL

Select Yes, On next reset to erase all system event logs upon next system reboot. Select

Yes, On every reset to erase all system event logs upon each system reboot. Select No

to keep all system event logs after each system reboot. The options are No, Yes, On

next reset, and Yes, On every reset.

When SEL is Full

This feature allows the user to decide what the BIOS should do when the system event

log is full. Select Erase Immediately to erase all events in the log when the system event

log is full. The options are Do Nothing and Erase Immediately.

Log EFI Status Codes

Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error Codes or

Progress Codes. The options are Enabled and Disabled.

bullx R423-E3 - Installation and User's Guide