User`s guide

7.3 Advanced Setup Configurations

Use the arrow keys to select Advanced and press <Enter> to access the following

submenu items:

► Boot Feature

Quiet Boot

Set this value to allow the bootup screen options to be modified between POST messages or

the OEM logo. Select Disabled to allow the computer system to display the POST messages. Select

Enabled to allow the computer system to display the OEM logo. The default setting is Enabled.

AddOn ROM Display Mode

This sets the display mode for the Option ROM. Select Keep Current to use the cur- rent AddOn

ROM Display setting. Select Force BIOS to use the Option ROM display mode set by the system

BIOS. The options are Force BIOS and Keep Current.

Bootup Num-Lock

Use this feature to set the Power-on state for the Numlock key. The options are Off and On.

Wait For 'F1' If Error

Select Enabled to force the system to wait until the 'F1' key is pressed if an error occurs. The

options are Disabled and Enabled.

bullx R423-E3 - Installation and User's Guide