User`s guide

5.10 Onboard Indicators
LAN LEDs
The Ethernet ports have two LEDs. On
each port, the yellow LED flashes to
indicate activity while the other LED may
be green, amber or off to indicate the
speed of the connection. See the table on
the right for connection speed LED
details.
IPMI Dedicated LAN LEDs
An additional IPMI Dedicated LAN is
also located on the I/O backplane.
The amber LED on the right indicates
activity, while the green LED on the left
indicates the speed of the connection.
See the table at right for more
information.
Onboard Power LED (LE1)
An Onboard Power LED is located at
LE1. This LED Indicator is lit when the
system is on. Be sure to unplug the
power cable before removing or adding
any components. See the table on the
right for more details.
SAS Heartbeat LED
LEDS1 is a SAS Hear tbeat LED.
When
LEDS1 is blinking, the SAS
ports are
functioning normally. See the table at
right.
BMC Heartbeat LED
A BMC Heartbeat LED is located at
DM1 on the serverboard. When DM1
is blinking, BMC is functioning normally.
Chapter 5. Advanced Serverboard Setup 43