User`s guide

Standby power
The Standby Power header is
located at JSTBY1 on the
serverboard. See the table on
the right for pin definitions. (You
must also have a cable to
use this
feature.)
Power SMB (I
2
C) Connector
Power System Management Bus
(I
2
C) Connector (JPI
2
C1) monitors
power supply, fan and system
temperatures. See the table on the
right for pin definitions.
IPMB
A System Management Bus
header for IPMI 2.0 is located
at JIPMB1.
Connect the
appropriate cable here to use
the IPMB I
2
C connection on your
system.
SATA DOM Power Connector
A power connector for SATA
DOM (Disk On Module) devices is
located at
JSD1. Connect an
appropriate cable here to provide
power support for your SATA
DOM devices.
SAS Battery
A SAS battery (JS3) provides
power backup support for the
cached data of onboard SAS
devices during power outages.
Cache data can be retained for
up to 48 hours.
Chapter 5. Advanced Serverboard Setup 39