User`s guide
Table Of Contents
- NovaScale 4020 User's Guide
- Preface
- Contents
- 1 System Description
- 2 Board Set Description
- 3 Configuration Software and Utilities
- Utilities / Drivers on Resource CD
- Power-on Sequence and Power-on Self-Test (POST)
- Extensible Firmware Interface Boot Manager
- The Extensible Firmware Interface (EFI) Shell
- BIOS Setup
- LSI Logic* SCSI Utility
- System Maintenance Utility
- EFI Platform Diagnostic Tests
- EFI Service Partition
- Console Redirection
- Terminal Mode
- Shutting Down the Server
- Servicing the System (basic knowledge)
- A Warning and Cautions
- B Working Inside the System
- C Hot-swapping System Components
- D Servicing the Electronics Bay
- Safety Warnings
88 NovaScale 4020 User’s Guide
The SDR tree retains its expanded/collapsed state for each of the branches until the SDRs are
reloaded or until the application is exited. If the tree view goes beyond the size of the screen a
vertical scroll bar is added to allow you to view all SDRs.
Viewing SDRs
SDR records can only be viewed one at a time. They are opened by clicking on the SDR in the
SDR tree. No other actions are allowed once an SDR is opened for viewing. If the displayed
data is too large to fit on the screen, the popup window is sized to the maximum viewable area
and a vertical scroll bar is added. To view a new SDR or to issue another command, close the
current window or use the Next and Previous buttons.
Figure 46. SDR Viewer