User`s guide
Table Of Contents
- NovaScale 4020 User's Guide
- Preface
- Contents
- 1 System Description
- 2 Board Set Description
- 3 Configuration Software and Utilities
- Utilities / Drivers on Resource CD
- Power-on Sequence and Power-on Self-Test (POST)
- Extensible Firmware Interface Boot Manager
- The Extensible Firmware Interface (EFI) Shell
- BIOS Setup
- LSI Logic* SCSI Utility
- System Maintenance Utility
- EFI Platform Diagnostic Tests
- EFI Service Partition
- Console Redirection
- Terminal Mode
- Shutting Down the Server
- Servicing the System (basic knowledge)
- A Warning and Cautions
- B Working Inside the System
- C Hot-swapping System Components
- D Servicing the Electronics Bay
- Safety Warnings
86 NovaScale 4020 User’s Guide
Clear SEL Button
This allows you to clear all the system SEL events. Before proceeding with the clear, you are
prompted with this message:
Do you really want to clear the SEL? These events will be
permanently removed from the system
You are given two options with this prompt, OK and Cancel. Choosing Cancel will return
you to the SEL Viewer main screen, choosing OK will clear the SEL. After the SEL is cleared,
the log and properties are refreshed and the main screen is updated with the new SEL.
Properties Button
This shows you the current properties of the SEL. Included in the properties are:
• IPMI version
• Number of Entries
• Last Add Time
• Last Erase Time
• Free Space Remaining (both in bytes and number of SEL events)
A message is displayed if there is an error retrieving the SEL properties.
Reload Button
This button forces a refresh of the SEL from the system. Both the event list and the properties
are refreshed.
Display as Hex Button
This button is only visible when the SEL is displayed in verbose mode. This will change the
event display to Hex mode.
Display as Text Button
This button is only visible when the SEL is displayed in Hex mode. This will change the event
display to text mode.