Parts List

how to play

1) 1 ON 1 BATTLE MODE

• Turn on & Pair Up

- Bring the two swords close together around 5-10 inches. Turn on both swords by moving

the switches located on the handles to the “ON” position. The LEDs on the sword will blink

showing the swords have powered on. When both swords say “En Garde” and LEDs are

steady, you have successfully paired up your swords and are ready for play.

Troubleshooting: If swords do not pair- restart the pairing: Bring the two swords close

together around 5-10 inches. Restart pairing again by moving the switch on both swords

to “OFF” position & back to the “ON” position.

*Please note the “pairing” process needs to be completed within 30 seconds, or the

swords will automatically enter solo mode.

install batteries

1. Open the battery compartment located on the handle using a Phillips screwdriver

(not included)

2. Insert batteries (3x AAA) as indicated in the diagram.

3. Replace battery cover and tighten with a screwdriver. Do not over tighten.

AAA

Step 1 Step 2

On/O Switch

5-10 Inches Apart