Datasheet

ManualsBrandsBulgin ManualsCable & Wire1m, Cable, USB C Plug-USB A Plug

Buccaneer for Data 5

A1, B1, A12, B12

A4, B4, A9, B9

B11

B10

Shell

Wire Colour

Red

Green

White

Blue (Brown Jacket)

White (Brown Jacket)

Blue (Red Jacket)

White (Red Jacket)

Wiring Notes:

1. Cable used has shielded twisted pairs with drain wires used for all SDP’s.

2. Pin A5 (CC) of the USB Type-C Plug shall be connected to Vbus through a 56 K Ω ±5% resistor.

3. Contaacts B6 and B7 are not connected in the USB Type-C Plug.

4. All Vbus pins are connected together within the USB Type-C Plug. A Bypass Capacitor is required between the ground pins in the USB Type-C Plug side

of the cable. The Bypass Capacitor is 10nF ± 20%. The bypass capacitor shall is as close as possible to the power supply pad.

5. All ground return pins are connected together within the USB Type-C Plug.

6. Shield and Gnd grounds are connected within the USB Type-C and USB 3.1 standard-A plugs on both ends of the cable assembly.

7. All USB Type-C plug pins that are not listed in this table shall be open (not connected).

BUCCANEER FOR DATA

4000 C-Type Series USB Buccaneer

Label

Gnd

Vbus

Vconn

Dp 1

D -

SSTXp 1

SSTXn 1

SSRXp 1

SSRXn 1

Type

Braid

Twisted Pair

Braid

Cable Number

10, 11

Screen

USB-3 Plug P2

4, 7

Shield

( )