Datasheet

ManualsBrandsBULGIN ManualsNetwork ConnectorsIEC connector C14 ATT.LOV.SERIES_POWERCONNECTORS PX Plug, straight Total number of pins: 2 + PE 10 A Black 1 pc(

IEC Connectors 265

A full range of quality mains rated inlets, outlets

and connectors conforming to IEC and EN 60320

specications carrying UL, CSA, VDE and

other approvals.

With electrical ratings up to 20A, 250V (UL) these

connector ranges oer solutions to most mains

powered equipment and cable applications.

The combinations of mounting styles and

terminations include: ange xing, snap to panel

and PCB mounting versions together with 2.8/

solder tabs, 4.8 and 6.3 fast on tabs, screw

terminal and PC spill versions.

Completing the range are insulating boots,

retaining and safety covers

In addition to the standard black moulding, most

styles are also available in either white or grey and

special colours to match OEM equipment can

also be supplied. (Subject to product approval

requirements)

Introduction

IEC Connectors

Inlets and Outlet Connectors

Distribution Units

Power Entry Modules

EMI Mains Filters

266-290

291-295

296-318

319-327

Summary of content (26 pages)

PAGE 1
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings up to 20A, 250V (UL) these connector ranges offer solutions to most mains powered equipment and cable applications. The combinations of mounting styles and terminations include: flange fixing, snap to panel and PCB mounting versions together with 2.8/ solder tabs, 4.8 and 6.
PAGE 2
IEC Connectors IEC60320 Main Inlets and Outlets Panel Mounting IEC60 320-1 IEC60 320-2-2 266 IEC Connectors Sheet No: No Pins Current Rating Flange Fixing Snap fit Fused Flange Fused Snap fit Filtered Fuse Filtered C14 3 10A, 250V a.c. PX0579 PX0580 PX0580/PC PX0580/PC/12132 PX0580/PC/7 PX0580/PC/7LC PX0575 PX0575/PC PF0001 PF0001/PC PF0002 PF0030 PF0030/PC PF0011 PF0011/PC PS00 PS01 PS20 PS21 PS25 PS26 C16 3 10A, 250V a.c. PX0590 PX0595 C18 2 10A, 250V a.c.
PAGE 3
IEC Connectors IEC60320 Mains Connectors and Plug Connectors Cable Mounting IEC60 320-1 IEC60 320-2-2 Sheet No: No Pins Current Rating Rewirable Side Entry Rewirable C13 3 10A, 250V a.c. PX0587 PX0588 PX0587/SE C15 3 10A, 250V a.c. PX0597 C19 3 16A, 250V a.c. PX0599 Sheet No: No Pins Current Rating Rewirable Side Entry Rewirable E 3 10A, 250V a.c.
PAGE 4
IEC Connectors EN60 320-1 Standard Sheet C13 Class I Rewirable Cold Condition Straight Female Connector Cable Mounting Rewirable Screw Terminals 10A, 250V a.c. PX0587 Side Entry Female Connector Cable Mounting Rewirable Screw Terminals 10A, 250V a.c. PX0587/SE Angled Female Connector Cable Mounting Rewirable Screw Terminals 10A, 250V a.c. PX0588 Specifications PX0587/Col PX0587/SE/Col PX0588 Terminations: Colours: Max. Rating: Contact Resistance: Insulation Resistance: A.C.
PAGE 5
IEC Connectors EN60 320-1 Standard Sheet C14 Class I Rewirable Cold Condition Snap Fit to Panel Inlet Fits Panel Sizes 1, 1.5, 2.0 or 3.0mm 2.8, 4.8, 6.3mm Tabs or Screw Terminals 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0575/10/28 PC Snap Fit to Panel Inlet its Panel Sizes 1, 1.5, 2.0 or F 3.0mm PC Spills 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0575/10/PC Specifications PX0575/Panel/Term/Col PX0575/Panel/PC/Col Fixing(Panel): Snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) /28 (2.
PAGE 6
IEC Connectors EN60 320-1 Standard Sheet C14 Class I Rewirable Cold Condition Flange Mount Inlet 2.8, 4.8, 6.3mm Tabs or Screw Terminals 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0580/28 Vertical Flange Mount Inlet 2.8, 4.8, 6.3mm Tabs or Screw Terminals 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0579/28 Specifications PX0580/Term/Col PX0579/Term/Col Fixing: Flange Flange Terminations: /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.3mm tab), /TERM (screw) /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.
PAGE 7
IEC Connectors EN60 320-1 Standard Sheet C14 Class I Cold Condition PC Flange Rear Mount Inlet With or Without Rear Cover PC Spills 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0580/PC PC Flange Rear Mount Inlet ith or Without Cover W PC Spills 4.8mm Top Tab (earth) 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0580/PC/7 Specifications PX0580/PC/Col PX0580/PC/7/Col Fixing: P.C.B./Flange P.C.B./Flange Terminations: P.C. Spills P.C. Spills Colours: Max.
PAGE 8
IEC Connectors EN60 320-1 Standard Sheet C14 Class I Rewirable Cold Condition (Fused) Flanged Mount Fused Inlet ingle Fuse 5 x 20mm S Spare Fuse Facility 2.8, 4.8 or 6.3mm Tabs 10A, 250V a.c. Fuse Contacts Isolated (PF0002) PF0001/28 PF0002/28 PC Flanged Mount Fused Inlet Single Fuse 5 x 20mm Spare Fuse Facility PC Spills - Horizontal 10A, 250V a.c. PF0001/PC Specifications PF0001/Term/Col PF0001/PC/Col PF0002/Term/Col Fixing(Panel): Flange P.C.B./Flange Flange Terminations: /28 (2.
PAGE 9
IEC Connectors EN60 320-1 Standard Sheet C14 Class I Rewirable Cold Condition (Fused) Snap Fit to Panel Fused Inlet Single Fuse 5 x 20mm Spare Fuse Facility Panel Sizes 1, 1.5, 2.0 or 3.0mm 2.8, 4.8 or 6.3mm Tabs 10A, 250V a.c. PF0011/10/28 PC Snap Fit to Panel Fused Inlet ingle Fuse 5 x 20mm S Spare Fuse Facility Panel Sizes 1, 1.5, 2.0 or 3.0mm PC Spills 10A, 250V a.c. PF0011/10/PC Specifications PF0011/Panel/Term/Col PF0011/Panel/PC/Col Fixing: Snap fit, /10 (1mm), /15 (1.
PAGE 10
IEC Connectors EN60 320-1 Standard Sheet C14 Class I Rewirable Cold Condition (Fused Twin) Flanged Mount Fused Inlet win Fused 5 x 20mm T 2.8, 4.8 or 6.3mm Tabs 10A, 250V a.c. PF0030/28 PC Flanged Mount Fused Inlet Twin Fused 5 x 20mm PC Spills 10A, 250V a.c. PF0030/PC Snap Fit to Panel Fused Inlet Twin Fused 5 x 20mm Fits Panel Sizes 1.0, 1.5, 2.0 or 3.0mm 2.8, 4.8 or 6.3mm Tabs 10A, 250V a.c.
PAGE 11
IEC Connectors EN60 320-1 Standard Sheet C15 & C16 Class I Class 1 Hot Condition Straight Female Connector able Mounting C Hot Condition Mates with PX0590 and PX0595 Screw Terminals 10A, 250V a.c. PX0597 Flange Mount Inlet Hot Condition 2.8 or 6.3mm Tabs 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0590/28 Snap Fit to Panel Inlet ot Condition H Panel Sizes 1, 1.5, 2.0 or 3.0mm 2.8, 4.8, 6.3mm Tabs or Screw Terminals 10A, 250V a.c. (15A, 250V a.c.
PAGE 12
IEC Connectors EN60 320-1 Standard Sheet C18 Class II Cold Condition Flanged Mount Inlet Two Pin Class II (No Earth Pin) 2.8, 4.8, 6.3mm Tabs or Screw Terminals 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0690/28 Snap Fit to Panel Inlet wo Pin Class II (No Earth Pin) T Panel Sizes 1, 1.5, 2.0 or 3.0mm 2.8, 4.8, 6.3mm Tabs or Screw Terminals 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0691/10/28 PC Snap Fit to Panel Inlet wo Pin Class II (No Earth Pin) T Panel Sizes 1, 1.5, 2.0 or 3.
PAGE 13
IEC Connectors EN60 320-1 Standard Sheet C18 Class II Cold Condition (Fused) Flanged Mount Fused Inlet Single Fuse 5 x 20mm Two Pin Class II (No Earth Pin) 2.8, 4.8 or 6.3mm Tabs 10A, 250V a.c. PF0006/28 Flanged Mount Fused Inlet Single Fuse 5 x 20mm (Fuse Contacts Isolated) Two Pin Class II (No Earth Pin) 2.8, 4.8 or 6.3mm Tabs 10A, 250V a.c. PF0007/28 Snap Fit to Panel Fused Inlet Single Fuse 5 x 20mm Two Pin Class II (No Earth Pin) Fits Panel Sizes 1.0, 1.5, 2.0 or 3.0mm 2.8, 4.8 or 6.
PAGE 14
IEC Connectors EN60 320-2-2 Standard Sheet E Class I Rewirable Angled Male Connector Cable Mounting Four Position Cable Entry Rewirable Screw Terminals 10A, 250V a.c. PX0685 Straight Male Connector able Mounting C Rewirable Screw Terminals 10A, 250V a.c. PX0686 Side Entry Male Connector Cable Mounting Rewirable Screw Terminals 10A, 250V a.c. PX0686/SE Specifications PX0685/Col PX0686/Col PX0686/SE/Col Fixing(Panel): Screw Terminals Screw Terminals Screw Terminals Max.
PAGE 15
IEC Connectors EN60 320-2-2 Standard Sheet F Class I Rewirable Snap Fit To Panel Two Way Outlet Panel Size 1.5mm 2.8mm Solder Tabs 10A, 250V a.c. (15A, 250V a.c. UL) All Terminals Linked PX0714/2/15/28 Snap Fit To Panel Three Way Outlet Panel Size 1.5mm 2.8mm Solder Tabs 10A, 250V a.c. (15A, 250V a.c. UL) All Terminals Linked PX0714/3/15/28 Snap Fit To Panel Four Way Outlet Panel Size 1.5mm 2.8mm Solder Tabs 10A, 250V a.c. (15A, 250V a.c.
PAGE 16
IEC Connectors EN60 320-1 Standard Sheet C14 Class I Cold Condition & EN60 320-2-2 Standard Sheet F Class I Cold Condition Snap Fit to Panel Inlet/ Outlet Inlet/Outlet combination Panel Size1.2mm 4.8mm tabs 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0716/48 Snap Fit to Fused Inlet/ Outlet Fused Inlet/Outlet combination 1-6 outlet versions Panel Size 1.5mm Terminals: inlet: 4.8mm tabs outlet: solder tags 10A, 250V a.c. (15A, 250V a.c. UL) All outlet terminals linked, common earth throughout.
PAGE 17
IEC Connectors EN60 320-2-2 Standard Sheet F Class I Snap Fit to Panel Outlet nap Fit to Panel S Panel Size 1.5mm Solder Tabs 10A, 250V a.c. (15A, 250V a.c. UL) All Terminals Linked PX0717/x/xx/ST Flange Mount Outlet Front of Panel Mount 6.3mm tabs 10A, 250V a.c. (15A, 250V a.c. UL) PX0578/63 Specifications PX0717/x/15/Termination PX0578/Termination Fixing: Snap fit 1.5mm accommodation Flange Terminations: /ST (solder /63 (6.3mm tab) Max. Rating: 10A, 250V a.c. (UL 15A, 250v a.c.
PAGE 18
IEC Connectors EN60 320-2-2 Standard Sheet F Class I Flange Mount Outllet .8mm or 6.3mm Tabs 2 10A, 250V a.c. (15A, 250V a.c. UL & CSA). PX0675/28 PC Flange Rear Mount Outlet PC Spills 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0675/PC Specifications PX0675/Term/Col PX0675/PC/Col Fixing: Flange P.C.B./Flange Terminations: /28 (2.8mm solder), /48 (4.8mm tab), /63 (6.3mm tab) P.C. Spills Colours: Max. Rating: No suffix (Black), /WH (White), /GY (Grey) 10A, 250V a.c. (UL & CSA 15A, 250V a.c.
PAGE 19
IEC Connectors EN60 320-2-2 Standard Sheet F Class I Snap Fit to Panel Outlet anel Sizes 1, 1.5, 2.0 or P 3.0mm 2.8 or 6.3mm Tabs 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0695/10/28 PC Snap Fit to Panel Outlet Panel Sizes 1, 1.5, 2.0 or 3.0mm PC Spills 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0695/10/PC Specifications PX0695/Panel/Term/Col PX0695/Panel/PC/Col Fixing: Snap fit, /10 (1mm), /15 (1.5mm), /20 (2mm), /30 (3mm) /28 (2.8mm solder), /63 (6.3mm tab) Snap fit, /10 (1mm), /15 (1.
PAGE 20
IEC Connectors EN60 320-2-2 Standard Sheet F Class I Snap Fit to Panel Outlet huttered S Panel Sizes 1, 1.5, 2.0 or 3.0mm 2.8, 4.8 or 6.3mm Tabs 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0783/10/28 Flange Mount Outlet Shuttered 2.8, 4.8 or 6.3mm Tabs 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0793/28 PC Snap Fit to Panel Outlet Shuttered Rectangular Flange Mount Outlet 2.8, 4.8 or 6.3mm Tabs 10A, 250V a.c. (15A, 250V a.c.
PAGE 21
IEC Connectors EN60 320-2-2 Standard Sheet H Class II Flange Mount Outlet wo Pin Class II (No Earth Pin) T 2.8, 4.8 or 6.3mm Tabs 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0705/28 Snap Fit to Panel Outlet wo Pin Class II (No Earth Pin) T Panel Sizes 1, 1.5, 2.0 or 3.0mm 2.8, 4.8 or 6.3mm Tabs 10A, 250V a.c. (15A, 250V a.c. UL & CSA) PX0725/10/28 Specifications PX0705/Term/Col PX0725/Panel/Term/Col Fixing: Flange Terminations: /28 (2.8mm solder), /48 (4.8mm tab) /63 (6.
PAGE 22
IEC Connectors EN60 320-1 Standard Sheet C19 & C20 Class I Cold Conditions C19 Straight Female Cable Connector ewirable Screw Terminals R 16A, 250V a.c. (20A, 250V a.c. UL and CSA) Wire Sizes (max); 3 x 2.5mm2, 3 x 12AWG Overall cable diameter up to 12mm PX0599 C20 Flange Mount Inlet 6.3mm or 4.8mm Tabs 16A, 250V a.c. (20A, 250V a.c. UL and CSA) PX0596 C20 Snap Fit to Panel Inlet its panel sizes 1, 1.5, 2.0 F or 3.0mm 6.3mm or 4.8mm Tabs 16A, 250V a.c. (20A, 250V a.c.
PAGE 23
IEC Connectors EN60 320-2-2 Standard Sheet J & I, Class I Cold Conditions Flange Mount Outlet Flange Mounting 6.3mm Tabs 16A, 250V a.c. (20A, 250V a.c., UL & CSA) PX0591/63 Snap Fit to Panel Outlet Snap Fit to Panel Panel Size 1.5mm 6.3mm Tabs 16A, 250V a.c. (20A, 250V a.c., UL & CSA) PX0592/15/63 Specifications PX0591/Termination PX0592/15/Termination Fixing (Panel): Flange Snap fit, 1.5mm accommodation Terminations: /63 (6.3mm tab) Max. Rating: 16A, 250V a.c. (UL & CSA 20A, 250V a.c.
PAGE 24
IEC Connectors Accessories Retaining Clip revents Accidental Removal P Fits flanged inlets KT0006 (Shown with PX0580 & PX0587) Retaining Clip Prevents Accidental Removal Fits fused flanged inlets) KT0009 (Shown with PF0001 & PX0587) Retaining Clip Prevents Accidental Removal For use with PX0596 flanged inlet and PX0599 connector KT0012 (Shown with PX0596 & PX0599) Specifications KT0006 KT0009 KT0012 Retaining Clip to prevent accidental removal of connector.
PAGE 25
IEC Connectors Accessories Blanking Cover Insulation Boot PNo 14228 Blanking Cover PNo 14340 Insulation Boot PNo 14277 PNo 14317 Blanking covers Protects Front of Outlet Connector Protects Against Accidental Electric Shock Specifications PVC Insulation Boots Protects Rear of Connector Protects Against Accidental Electric Shock P.No. 14228 P.No. 14277 P.No. 14340 P.No.
PAGE 26
IEC Connectors Accessories Insulation Boot Insulation Boot PNo 12075 PNo 11328 Insulation Boot Insulation Boot PNo 11987 PNo 14064 PVC Insulation Boots Protects Rear of Connector Protects Against Accidental Electric Shock Specifications P.No. 11328 P.No. 11987 P.No. 12075 P.No.