Datasheet

27
Examples of printing
EN602A EN730 EN822
C1350AL ---
C0480AL ---
C1550XL ---
C1553PL ---
Finish Matt is standard
Colour Call factory for custom colours.
A full range is available for large orders
Legend printing Select from the examples or
call factory for custom legends
Lamp voltage Call factory for details
Blanking plates A0494 Dummy units
to fill unused panel holes
Protective cover (designed to IP65)
Snaps on to A, L, Q or T bodies
(add G after body in cat no). This reduces
panel thickness by 1mm.
Panel sealing washer W42 is available for
the above body sizes but reduces panel
thickness by a further 0.8mm.
Covers are not suitable for momentary types.
Arcshield
Hides switching arc
For all options call the factory
tel: [phone] • Arcolectric • email: [e-mail]
A
Gloss or Matt
B
Matt only
L
Matt only
Q
Gloss or matt
R
Matt only
T
Matt only
BODY
DIMENSIONS (mm)
Panel cut-out
*
Flange
OPTIONS
Panel thickness
A,Q 0.75 to 3.3mm
L,B,T 0.75 to 2.5mm
R 0.75 to 3.0mm
*
For cut-out details
on momentary switches
call the factory
2.0
25.3 Max
9.2
13.2
7.6
Terminal spacing - Poles 10.2 between centres
22.3/22.4
27.2
27.3
22.1/22.2
30.0
30.1
22.3/22.4
28.2
28.3
22.3/22.4
28.2
28.3
23.0/25.4
28.4
28.5
22.1/22.2
30.0
30.1
25.0
30.2
25.0
33.4
R3.5
32.0
25.0
R1.0
25.0
30.2
R1.6
28.9
33.2
30.2
25.0
R1.6
C1553AA with M616 guard
Cut-out 22.0/22.1x 29.4/29.5
Guard accepts “A” body only
Optional snap-in M441 barrier
Cut-outs must be punched in the direction of insertion
plunger tube
1350 High inrush, positive break switching
The 1350 series mechanism ensures
contact welds formed at switch-on,
are positively separated by the
plunger tube acting directly on the
step in the moving contact.
step