Datasheet

ManualsBrandsBulgin ManualsIndicatorsLED Indicator, Green, 10mm, 230V, Tab, 6.3 mm

tel: +44 (0)20 8979 3232 • Arcolectric • email: info@arcoswitch.co.uk

Authority

European

Technical Information - Indicators

The majority of Arcolectric indicator lights can be supplied with alternative light sources:

Neon, Fluorescent, Filament lamp or LED.

NEON and FLUORESCENT LAMPS

Colours

Available with Red, Amber, Green or Clear lenses.

Maximum striking voltages

Standard brightness types 65Vac 90Vdc.

High brightness types 85Vac 135Vdc.

High brightness types are usually fitted.

Life

Typically 25,000 hours (Green fluorescent lamps 20,000 hours). (Measured to a point

when the light output of the lamp is half its original level.)

The end of life for a neon lamp is not usually a sudden failure.

False signals due to long wiring

It is possible for neon or fluorescent tubes to glow when they should be off. The false

signal is caused by the capacitance effect of fairly long wiring to the indicator being

adjacent to other live cables. This effect can be prevented in most cases by fitting a 100k

resistor across the supply wires close to the indicator assembly.

MATERIALS

Moulded bodies and bases Nylon 6.6

Metal bodies and bezels Chrome plated brass (except #)

Lenses Polycarbonate

Terminals (most types) Brass (electro-tin plated)

Terminals (exceptions) Brass (flash silver* or nickel** plated)

Threaded metal nuts Brass (nickel plated on 0275/7)

Other fixings Call factory for details

* R9, 0061, 0062, 0430, 0480, 1090, 1091, 6030, 7030, 8630, 8580

** # 3130, 3160, 3161, 3221 have nickel plated terminals with steel screws and plated

polyamide bezel trims

SYMBOLS

TEMPERATURE RATING

FILAMENT LAMPS

Colours

Available with Red, Amber, Green, Clear or Blue lenses.

LEDs - DC

Colours

Red, Yellow, Green, Blue and White.

Voltage

Basic voltage 2.0/2.2V. Some items are available with integral resistors for 12V use.

For details of resistors required for higher voltages, please call the factory.

Current

Maximum continuous forward current 20mA.

Life

>100,000hrs

LEDs - AC

Colours

Red, Yellow, Green, Blue and White.

Voltage

Rated up to 230V ac, suitable for use at 110V and 230V ac.

Current

<3mA

Life

>100,000hrs

Terminals Wire leads Solid wires Panel hole size Panel thickness Temperature rating

C 6.3, H 4.8, K 2.8 200mm long Standard LED only

with Terminals

with Wire leads

PVC

SILICONE

T125°C

T105°C

T65/75°C

Summary of content (8 pages)

PAGE 1
Technical Information - Indicators The majority of Arcolectric indicator lights can be supplied with alternative light sources: Neon, Fluorescent, Filament lamp or LED. FILAMENT LAMPS NEON and FLUORESCENT LAMPS Colours Colours Available with Red, Amber, Green, Clear or Blue lenses. Available with Red, Amber, Green or Clear lenses. LEDs - DC Colours Maximum striking voltages Standard brightness types 65Vac 90Vdc. High brightness types 85Vac 135Vdc. High brightness types are usually fitted.
PAGE 2
Indicator Lights Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) LED - DC Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. LED - AC Red, Yellow, Green, Blue, White 110-230V ac operation. DC AC Neon, LED, mains LED or filament lamp Bezel sizes from 6.7 to 16.
PAGE 3
Indicator Lights (Neon, LED and Filament Lamp) Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) LED - DC Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. LED - AC Red, Yellow, Green, Blue, White 110-230V ac operation. DC AC Neon, LED, mains LED or filament lamp Bezel sizes from 6.7 to 16.
PAGE 4
TERM L TYPE PANEL & ˚C (C) 0276 AA ILLUMINATION OPTIONS DIMENSIONS (mm) 9.5 K 2.8 0.8-2.8 DC 22.2 4.0 33.0 Ø12.0 H 4.8 AC 33.7 page 66 C 6.3 16.0 L (C) 0275 OO 10.0 K 2.8 12.0 max DC 22.2 H 4.8 3.0 32.5 Ø13.3 AC page 66 C 6.3 L (C) 0275 OO 32.7 16.0 Chrome bezel 10.0 Ø13.3 K 2.8 11.5 max DC 22.2 H 4.8 3.5 3.0 32.0 32.5 Ø15.6 AC page 66 C 6.3 32.7 L (C) 0276 OO 10.0 K 2.8 2.8 max DC 22.2 4.0 33.0 Ø12.0 H 4.8 AC page 66 C 6.
PAGE 5
Indicator Lights (Neon, LED and Filament Lamp) Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) LED - DC Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. LED - AC Red, Yellow, Green, Blue, White 110-230V ac operation. DC AC Neon, LED, mains LED or filament lamp Bezel sizes from 6.7 to 16.
PAGE 6
TERM L TYPE (C) 0177 OO PANEL & ˚C Chrome bezel ILLUMINATION OPTIONS DIMENSIONS (mm) 14.9 12.7 K 2.8 12.0max DC 22.2 3.3 8.3 53.7 H 4.8 Ø14.6 AC page 66 C 6.3 L 32.2 (C) 0067 OO Chrome bezel 12.7 K 2.8 1.14max DC H 4.8 AC C 6.3 L 38.1 page 66 (C) 0180AA 5.1 Ø16.0 5.1 Ø15.0 12.7 K 2.8 19.0max DC 10.4 22.3 H 4.8 Starlock fixing page 66 C 6.3 21.3 L (C) 0180BB Chrome bezel 1.3 13.5 K 2.8 0.9-1.14 DC H 4.8 10.4 L 22.3 5.1 Ø16.3 25.4 3.2 Ø15.
PAGE 7
Indicator Lights (Neon, LED and Filament Lamp) Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) LED - DC Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. LED - AC Red, Yellow, Green, Blue, White 110-230V ac operation. DC AC Neon, LED, mains LED or filament lamp Bezel sizes from 6.7 to 16.
PAGE 8
Indicator Lights (To match 8500, 8600, R13, 1500, 1550, 5500, 6000, 8300 and 7000 switches) Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses Filament lamp Indicator lights Neon or filament lamp 100/130V (marked 110V), 200/250V (marked 230V) Available with Red, Amber or Green lenses 6V, 12/14V, 24/28V Bezel sizes from 6.7 to 16.