Specifications

 Chapter6FunctionalParameterDetailVFD‐G7SeriesFrequencyInverterOperationManual

94
2:Reverseforbidden
The inverter is reverse forbidden; it is suitable for the special reverse forbidden situation.
After reverse forbidden, if there is reverse running control signal, the frequency inverter
won’trun.
F0.10 Acceleration time 0
Default: Model
determination
Setting scope：0.1～3600.0s
F0.11 Deceleration time 0
Default: Model
determination
Setting scope：0.1～3600.0s
Acctimeisthetimetakenforthemotortoacceleratefrom0Hztothemaximumfrequency
(F0.05).Dec time is the time taken for the motor to decelerate from maximum frequency
(F0.05)to0Hz.
ActualAccandDectime=setAccandDectime*(setfrequency/maxfrequency)
Fig.6-1 Illustration of Acc/Dec time
F0.12 Running channel selection Default: 0
Setting scope: 0～2
Selectionofthechanneloffrequencyinvertercontrolinstruction.
Thecontrolcommandof frequencyinverterincludes:start,stop,forward,reverse,inching,
faultreset.
0: Keyboard start-stop (“REMOT” light is off)