Specifications

Chapter 5 Function Parameter Simple List VFD‐G7 Series Frequency Inverter Operation Manual

77
Function
Code
Name
Setting Scope and
Introduction
Factory
Defaults
Modify Page
1: No alarm and continue
running
2: No alarm and stop in
stopping mode(only in
serial port control mode)
3: No alarm and stop in
stopping mode(in all
control modes)
Tens: The response of
communication：
0: Respond for writing
1: No respond for writing
F9：Human-computer Interface Parameter Group
F9.00
Key function
setting
The unit: Function of
QUICK/JOG key
0：Jog operation
1: Switch between
forward and reverse
2: Clear the set
UP/DOWN
3: Main or auxiliary
frequency source switch
4: Torque control
prohibit/valid switch
Tens: Function of
STOP/RST key in stop
state
0: Valid for panel
0000H √ 142