Specifications

Appendix1InstructionofStandardExpansionCardSC‐EXT1‐IO

178
Analog output FM2
Analog outpu
t
signal 2
The voltage or current output should be
selected through JP10 JUMP WIRE on
control panel.
Output voltage range：DC 0V～10V；
Output current range：DC 0～20mA；
Rapid pulse
input
HDI-COM 0.0～50.0kHz
1、Opto-couplers isolation
2、Input impedance：3.3KΩ
3、level input, the voltage range：9V～30V
Rapid pulse
output
HDO-COM0.0～50.0kHz
Output voltage range：DC 0V～24V
Max output current 50mA
Relay output TA4- TC4
N
ormally open
terminal
Relay output, normally open
Contact capacity: AC 250V/3A ， DC
30V/1A
Communication
interface
485+
RS485
communication+
Support standard MODBUS protocol
485-
RS485
communication-
Support standard MODBUS protocol
3、JumperDescription
Jumper number Description
JP6 Choose external power supply PW input or machine +24V
power supply.
JP10 Analog output FM2 signal type choice
Choose DC 0V～10V or 0～20mA output