Specifications

 Chapter6FunctionalParameterDetailVFD‐G7SeriesFrequencyInverterOperationManual

150
Chapter8.
Fb.11 Present fault running frequency
Default: 0.00Hz
Setting scope：
Fb.12 Present fault output current
Default: 0.0A
Setting scope：
Fb.13 Present fault busbar voltage
Default: 0.0V
Setting scope：
Fb.14 Present fault input terminal state
Default: 0
Setting scope：
Fb.15 Present fault output terminal state
Default: 0
Setting scope：
Fb.16 Retain
Default:
Setting scope：1
6.13 FC Group Application Parameter Group 1
FC.00～FC.06
Retain
6.14 FD Group Application Parameter Group 2
FD.00～FD.04
Retain
6.15 FE Group Frequency Inverter Noumenon Parameter Group
This group is the parameter group of manufacturer, the user don’t try to open this
parameter, otherwise, it would cause the frequency inverter couldn’t run normally or be
damaged.
6.16 FF Group Monitoring Variable Group
This parameter supply different variable information, when the frequency inverter is
operating.Anditisjustread.
Function code Name Unit and meaning
FF.00
Operation
frequency
Unit: 0.01Hz