Specifications

VFD‐G7 Series Frequency Inverter Operation ManualChapter 6 Functional Parameter Detail

143
timewherezerofrequencyisoutput.Asshowninfigure6‐17:
F A.05 Run reverse/forward dead time
Default: 0.0s
Setting scope: 0.0～3600.0s
Figure 6-17 Illustration of run reverse/forward dead time
FA.06 Skip frequency
Default: 0.00Hz
Setting scope：0.00～F0.05
FA.07 Range of skip Frequency
Default: 0.00Hz
Setting scope：0.00～F0.05
Whenthereferencefrequencyisintherangeofskipfrequency,theactualfrequencywillbe
theborderoftheskipfrequencyandnearthereferencefrequency,asshowninfigure6‐18:
Figure 6-18 Illustration of skip frequency
By setting the skip frequency that will cause resonant with the load, which should be
avoided. The drive can set a skip frequency point. If the skip frequency is set to 0, the
functionisinvalid.