Specifications

 Chapter6FunctionalParameterDetailVFD‐G7SeriesFrequencyInverterOperationManual

128
F5.21 FM1 output lower limit percent Default: 0.0%
Setting scope: 0.0 ～
100.0%
F5.22
Corresponding output of FM1
lower limit
Default: 0.00V
Setting scope: 0.0 ～
10.00V
F5.23 FM1 output upper limit percent
Default:
100.0%
Setting scope: 0.0 ～
100.0%
F5.24
Corresponding output of FM1
upper limit
Default:
10.00V
Setting scope: 0.0 ～
10.00V
Theabovefunctioncodesdefinerelationshipbetweenoutputvalueandtheoutputvalueof
analog output, if the output exceeds the reference range of the max/min frequency, the
exceeding part will be calculated as upper limit output or lower limit output, as shown in
figure6‐14.
Whentheanalogoutputis
current,20mAisequivalentto10V.
Indifferentapplication,the100%ofoutputvaluecorrespondsdifferentanalogoutput,refer
todescriptionofapplicationpart.
Figure 6-14 Corresponding relation between FM1 output voltage and output percent
F5. 21 F5. 23
F5. 2 2
F5. 2 4
FM1out put per cent
FM1 out put vol t age( 10V/ 20mA)