Specifications

 Chapter6FunctionalParameterDetailVFD‐G7SeriesFrequencyInverterOperationManual

126
followingfigure6‐13:
Figure 6-13 Illustration of FDT electrical level
F5.16 FDT Torque level detection value Default: 100.0%
Setting scope ： 0.0 ～
250.0%
F5.17
FDT Torque level detection lagged
value
Default: 5.0%
Setting scope: 0.0 ～
100.0%
When output current percent is equal or greater than F5.16, the corresponding
multi‐functioninputterminalisclose, whenoutputcurrent percentislessthanor equalto
F5.16*(1000‐ F5.17) again, then the terminal breaks. It is similar with FDT electrical level
function.
Terminal output will break unconditionally in stop or fault state.
F5.18 FM1 output selection Default: 0
Setting scope：0～15
F5.19 FM2 output selection Default: 3
Setting scope：0～15
F5.20 HDO high speed pulse output selection Default: 1
Setting scope：0～15
The standard output of FM1 and FM2 analog output is 0～10V or 0～20mA, current or