Specifications

 Chapter6FunctionalParameterDetailVFD‐G7SeriesFrequencyInverterOperationManual

122
F4.20 Filter time of input V2 Default: 0.10s
Setting scope： 0.0～10.00s
ThesettingmethodofV2issimilartoV1.
Notes:TheanalogV2couldsupport0~10Vor4~20mAinput.WhenV2select4~20mAinput
throughJP2 jumper, whensettingF4.16andF4.18,it needtoconvertto voltageaccording
toactualinputcurrent.Theconversionmethod:20mAcorrespondstothevoltage
10V.
F4.21
HDI high speed impulse
frequency
lower limit
Default:
0.00kHz
Setting scope： 0.00～F4.23
F4.22
The reference percent
corresponding to lower limit
frequency of HDI
Default: 0.0%
Setting scope: -100.0 ～
100.0%
F4.23
HDI high speed impulse
frequency
upper limit
Default:
50.00kHz
Setting scope: F4.21 ～
50.00kHz
F4.24
The reference percent
corresponding to upper limi
t
frequency of HDI
Default:
100.0%
Setting scope ： -100 ～
100.0%
This group the function code of this group defines the corresponding relation when using
impulseasinputmode.ThesettingofthisgroupissimilartoV1.


6.6 F5 Group Output Signal Group
F5.00 SP1 output selection Default: 1
Setting scope： 0～30
F5.01 SP2 output selection Default: 2
F5.02 Relay 1 output selection Default: 3
F5.03 Relay 2 output selection Default: 0
F5.04 Relay 3 output selection Default: 0