Specifications

VFD‐G7 Series Frequency Inverter Operation ManualChapter 6 Functional Parameter Detail

121
analoginput’sreferencevalues.Whentheanaloginputvoltageexceedsthereferencemax
or min range,the exceeding part will becalculatedas max or min value,seethe following
figure6‐11.
Figure 6-11The relationship between analog preset and reference value
In different application, analog setting 100% corresponding nominal values have many
difference,pleaserefertotheinstructionofeachapplication.
V1 input filter time: adjust the analog input sensitivity, appropriately increase this value
couldenhancetheimmunityleveloftheanalog,butitwilllowertheanaloginputsensitivity.
F4.16 Lower limit of V2 Default: 2.00V
Setting scope： 0.0～F4.18
F4.17
The reference percent
corresponding to
lower limit of V2
Default: 0.0%
Setting scope: -100.0 ～
100.0%
F4.18
Upper limit of V1 Default: 10.00V
Setting scope: F4.16 ～
10.00V
F4.19
The reference percent
corresponding to uppe
r
limit of V2
Default: 100.0%
Setting scope: -100.0 ～
100.0%
V1V1 l ower limit
F4. 11
V1 upper l i mit
F4. 13
V1 l ower limit
cor r espondi ng
set t i ng per cent
F4. 12
V1 upper l i mit
cor r espondi ng
set t i ng per cent
F4. 14
V1 i nput l i mit
Gi ven f r equency PI D Tor que