User's Manual

60
**Note – whenever out of main screen – all lasers are off and laser outputs
(including from manual operation) are disabled**
This menu allows the user to Select the par output.
Default is Audio.
**Note that the visual outputs will perform based on the standard device
settings. In other words if the output settings are for blinking, the laser will
blink. If the output settings are for a steady beam, the laser will NOT blink.**
Same concept as before on the arrow – this is a place holder for an intuitive
method of showing which item is selected.
Alternatively this can be selected in a single drop down menu or selection
configuration such as:
Where the other selections are Red Laser, Green Laser, Forest Laser
Main Display > Settings > Set Par > Select Output
Red Laser
Select Par Output
<< Par Set Menu
Audio
Green Laser
Forest Laser
Audio