User's Manual
10
Quick start and recommended user care
- Getting started [link to latest video guide on website=
seems easiest way to update a video for each FW update]
- Familiarization of controls, components, and features of the NURO will
help with understanding and following these instructions and the terminology used.
- Install batteries, your NURO comes with a 5/64” allen key for loosening
& tightening the battery door screws. Use caustion the screws do not require much
force and should never be forced beyond finger tight if resistance is encountered.
Rather unscrew and verify no debris is present on the screw threads or the threaded
inserts in the housing causing the resistance.
- Observe the precaution to never look into laser apertures or point
them at anyone’s eyes – turn on power by pressing the power switch. The display
backlight will light. After 3-5 seconds press the enter button and the main screen
should appear indicating the status and setting of the NURO device similar to the
example to the left.
- The following pages explain the various settings and indications of the
NURO device main screen.
The NURO Device
000.00
MSTR
YY DD MM
24HR
BATXXX%
R
G
F
Par: Off
Settings
Mode: Manual
Save
Prog: None
ID
ACT
SPLIT
TIME
XX
STRT
XXX.XX XXX.XX
ID
XXXX
SPLIT TIME
ID
ACT
SPLIT TIME
ID
ACT
SPLIT TIME
ID
ACT
SPLIT
TIME
ID
ACT
SPLIT TIME
ID
ACT
SPLIT TIME
ID
ACT
SPLIT TIME
Link: XX
ISO: XX
Ctrl: XXXXXXXX
XXXXXXXXXXXXX