Instruction Manual

5. Select the WiFi network you wish to pair the IoT Energy Meter with. Enter the
password for the network. The IoT Energy Meter will transmit its energy readings to
the bpulse web-portal via this particular WiFi network.
6. Once you hit “Save”, the “New_WiFi_Setup” network will disappear. The IoT Energy
Meter is now successfully installed.
Note : Please do not press any of the buttons on the IoT Energy Meter’s display
screen. This might change the meter’s configuration/settings.
You may view all energy readings from the meter at :
http://bpulseportal.com/admin/
You may write to [e-mail] if you’re unable to log into the portal or if you wish
to modify your login credentials.