Specification

RECESSED MINI

FEATURES:

-Mounts flush on exterior surface

-Easy to install on all types of exteriors

-Single unit body construction of Mount and Ring.

-J-Channel eliminated

-Finish trim ring adjusts for a range of siding thicknesses

-Receptacle cut-out provided 1 7/8 x 3.

-Pattern provided on back of part for 2 7/8 x 4 5/8 rectangular cutout

-Paintable version available

recessed_mini_spec.ai

Issued: 06/18/01

Revised: 10/13/10

SPECIFICATIONS:

Material: Base: UV stabilized copolymer; color molded in; .085" nominal wall

Ring: UV stabilized copolymer; color molded in; .085" nominal wall

Fabrication: Two piece molded assembly

Trim ring single piece molded unit

Attachment: Screw or nail directly to any surface.

Packaging: 10 pack

Dimensions: See drawing below (all dimensions in inches)

Patent No: 5326060

The Recessed Mini is used for mounting short wire connections, flush mounted outlets, hose bibs and

other exterior fixtures. The exclusive lock on trim ring speeds installation on

any surface: wood, vinyl, aluminum, stucco or hardwood.

0.75, 1, 1.25

3 3/16

6 3/4

4 15/16

PAGE 1
RECESSED MINI The Recessed Mini is used for mounting short wire connections, flush mounted outlets, hose bibs and other exterior fixtures. The exclusive lock on trim ring speeds installation on any surface: wood, vinyl, aluminum, stucco or hardwood. FEATURES: -Mounts flush on exterior surface -Easy to install on all types of exteriors -Single unit body construction of Mount and Ring. -J-Channel eliminated -Finish trim ring adjusts for a range of siding thicknesses -Receptacle cut-out provided 1 7/8 x 3.