Instructions / Assembly

ManualsBrandsBuilders Choice ManualsDoors & Windows32 in. x 80 in. 5-Panel Shaker Solid Core Unfinished Fir Wood Interior Door Slab

1

2

3

4

5

6

7

8

9

7

WARNING: Cancer and

Reproductive Harm

www.P65warnings.ca.gov

INSTALL THE DOOR

STEP 7:

Position trim or slide trim assembly (two piece

jamb) onto the frame. Carefully nail the trim on

both sides of the door every 12" to 16" using 4d

nishing nails. (See Figure 7.)

STEP 1:

Fill any nail/screw holes and

sand smooth.

STEP 2:

Finish all six sides of the door

slab and the frame as instructed

in the Wood Door Care & Finishing

Recommendations.

STEP 3:

Install lockset hardware per

supplied instructions.

STEP 4:

Protect recently installed units from

damage from plaster, paint, etc. by

covering the unit with plastic.

FINISH THE INSTALLATION

(Continued)

Door Slab

Trim

Figure 7