Instructions / Assembly

DOG HOUSE KIT

FRONT & BACK PANELS (2x)

FLOOR PANELS (2x) ROOF RIDGE (1x)

READ ALL INSTRUCTIONS AND REVIEW DIAGRAMS

BEFORE BEGINNING THE INSTALLATION TO GET A

THOROUGH UNDERSTANDING OF THE PROCESS.

ROOF PANELS (2x)

SIDE PANELS (2x)

INSTALLATION GUIDE

2-1/2" BOLT & HEX NUT (8x)

1-1/4" WOOD SCREW (14x)

KIT INCLUDES

PAGE 1
DOG HOUSE KIT INSTALLATION GUIDE READ ALL INSTRUCTIONS AND REVIEW DIAGRAMS BEFORE BEGINNING THE INSTALLATION TO GET A THOROUGH UNDERSTANDING OF THE PROCESS.
PAGE 2
NOTE: in order to protect the wood on your dog house, it is recommended to apply a protective stain finish or clear coat at least once a year. Step 1 Step 2 Connect the front and back panel to each side using the 2 1/2" lag bolts and hex nuts (A). Insert the two floor panels into the dog house. OPTIONAL: use wood glue to permanently fasten (not included) Step 3 Step 4 Attach the roof to the top of the front and back panels using the supplied 1 1/4" wood screws (B).